Frequently Asked Questions

What are the Skins for?

Not only do they avoid the wear and tear on the original screen printing, but they also prevent any mark of use, fingerprints, scratches, the dust that lodges on your equipment, etc.

How much is it?

Please check our shop to see all products and their prices.

What if my equipment is not found on the website?

We have a fairly long list of devices in stock. But if yours is not listed, please contact us and we can design it.

How are they installed?

Placing it is very easy, and it takes about 5 minutes. If you have a Mixer, a Controller or a CDJ, you have to remove the knobs (they all come out by applying pressure), Pioneer Faders being the only exception. Below you can find a tutorial about how to remove them.

WATCH VIDEO

Once you remove all the knobs, place the skin and put them back.

Do skins need to be stuck to my hardware model?

Our skins are placed between the front of our equipment and the knobs, so it is not necessary to glue them, in case of a mixer or a controller that has many knobs, the skin is super attached and does not move at all.

In the case of a cdj or a vinyl tray that mostly does not have knobs or has two at most, the skin is useless, for that we deliver round stickers of 10mm in diameter so that you can only stick the ends.

But everything will depend on the use you give to your equipment, if in your case the equipment is static in your study, it will not be necessary to paste it. Here we leave you several video links for you to see.

Does the Skin interfere with the use of the equipment? What material is it made of?

Not at all, our Skins are made of a special 0.5mm thick Acrylic, where it does not affect the daily use of our equipment.

Do they come with screen printing?

No, our Skins are completely transparent like glass, so they do not have screen printing. We only make some models with screen printing that are the most damaged and / or sold on the market, example: Djm800, Djm900. But we DO NOT do for other teams.

Does dust collect between the Skin and the equipment? Can I remove the skin?

The answer is NO, no dust collects between the equipment and the skin, the dust that flies in the environment always falls from above, that is why our Skin is in charge of protecting our equipment. You can put the skin on and take it off as many times as you want, if you want to clean it, we recommend using a chamois in optimal condition and glass cleaner.

Do you send any protector for the Jog or Plate?

Yes, the plate is also an important part of our equipment that we use constantly, and being the highest part of our equipment always suffers scratches, that is why we also send a skin to protect it, this obviously is a piece that requires yes or yes to be glued, and it is glued at 4 ends with the round stickers that we send and here we also leave you an example of how they are glued.

Our skins are placed between the faceplate and the knobs, so it is not necessary to stick them. In the case of a mixer or a controller, which have many knobs, the skin is firmly attached and does not move at all.

In some cases, such as a CDJ, which generally do not have knobs or have two at most, we recommend you use a 10 mm round stickers kit for you to paste only the corners.

However, everything will depend on the use you give to your equipment. If it is in a fixed place in your studio, it will be up to you whether to paste it or not. Below we leave several video links for you to watch.Not at all, our Skins are made of a special 0.5mm-thick Acrylic, which does not affect the daily use of your equipment, neither the knobs movement nor the faders slide.

Do they come with screen printing?

No, our Skins are completely transparent like glass, so they do not have screen printing. We only make some screen-printed models for the most damaged and/or sold products on the market, for example, Djm800, Djm900. But we DO NOT do screen-printed skins for other models.

Is dust collected between the Skin and the equipment? Can I remove the skin?

The answer is NO, no dust is collected between the equipment and the skin. The dust that floats in the environment always falls over the skin, that is why our Skin has the function to protect your equipment. You can put the skin in and take it out as many times as you want. If you want to clean it, we recommend using a dustcloth in mint condition and window-cleaning liquid.

Do we deliver any protector for the Jog or Plate?

Yes, the plate is also an essential part of your equipment that is continuously used and, being the highest part of your equipment, it always suffers scratches. That is why we also send a skin to protect it. This is obviously a piece that requires to be attached no matter what. You can stick the edges with the round stickers that we send you. Here we also give you an example of how they are stuck.

DJSKIN is a project which seeks to solve the problem of wear and tear of equipment in use. Our mission is that DJ’S can keep their devices like new for as long as possible. This is why we have developed a product, tested on +100 different models, which adapts without problems and whose function is to keep your equipment in its original state.

Once the buyer accepts these terms and conditions, he agrees to the following shipping / return / refund terms – In case of receiving a product with manufacturing defects, you must send a detailed video / photos of the problem, and we will send the new product in perfect condition at no shipping cost / product -TOTALLY FREE OF CHARGE- – If the customer change opinion about order, and decided to cancel when the shipping is on courier, need to pay return shipping, and then we will make a refund. – The items can be a little different of the photos/render, maybe divided to clean/shipping/replace more easy. – In case of receiving a defective product, with obvious breakage due to transport, the client must notify immediately, attaching photos & video of the packaging, where the problem can be appreciated and the label with its numbering and transport – We will not issue any type of refund, once the product has arrived and has been manipulated by the customer – The client accepts the terms and conditions, when bidding, waiving all disputes in payment gateways and claims – The shop, will not refund defective orders, it will only send a new product free of charge, in case it is defective from the factory -FREE OF CHARGE- – In cases of package return, The shop just will be refound the price of the product, not shippings rates

Originally designed in Argentina and manufactured in Spain, we distribute this innovative product throughout the world, complying with the highest quality standards.